Wax Injector

Pure Italian Technology
Second Generation Systems
Freely Modular and Setting Up Systems
Various and Cheap

8 Steps Up Ahead The Others

Transparent Tank always under vacuum (it removes micro bubbles and dampness)
Possibility of dividing the tank for Different Waxes
Possibility of having till 4 Working Positions in the same machine
Vaccum Meter; it is used to measure the vacuum level into the mould (the injector starts when the vacuum reaches 100%)
Syringe for regulating the pressure and the injection temperature(it easyand accurate on minimum quantity of wax)
Auto Centering Clamp for moulds with different thickness (no support is required)
RFID Reader of the mould (it reads the parameters saved on the mould)
A 3,8” Touch-Screen

The innovative modular system for vaccum wax injection, fully controlled and programmable, able to feedsimultaneously up to 4 independent work stations.

Technical Features:

Power Requirements	220 VAC, 50/60 Hz, mono-phase
Power Consumption	700 VA
Compressed Air Requirement	6 Bar
Wax Tank Capacity	3 L (Rechargeable Continuously)
Mould min. Dimensions	50 L x 40 W x 20 H mm
Mould max. Dimensions	130 L x 90 W x 40 H mm
Nozzle Wax Injector Temprature	40-90 °C ±0,5 ° Digital
Environment Temprature	5-40 °C
Max. Number of Working Stations	4
Wax Injection Time	Programmable da 0 a 99 Sec
Cycle Time	Programmable da 0 a 99 Sec
Mould Recognition/Program auto Loading	Optional
Operator Interface	Touch Screen 3,8" W77 x H58 mm
Central Unit Dimensions	350 L x 430 W x 520 H mm
System Dimensions (With 4 Station)	970 L x 430 W x 520 H mm
Mould Dimensions	50 L x 30 W x 18 H mm 90 L x 90 W x 50 H mm 120 L x 90 W x 50 H mm
Weight Central Unit	26 Kg
Weight Central Unit +4 Stations	58 Kg

Wax Injector Systems

1. EPIGONOS STS

MONO STS

Compact and small
Medium-small waxes
Production of 2.000 pcs/day
Only one operator

Epigonos MONO STATION STS

Not expanding Mono station injector. Equipped of one melting tank and one vacuum meter for checking the vacuum inside the mould, RFID microchip readers included. Micro syringe of 8 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 50x30x8 mm to 120x90x45* mm. Machine: 34 kg - 600x360xh530 cm / Wooden box: 65 kg - 75x47xh70 cm. (*) on special request from 50x30x23 mm to 120x120x60 mm, 16 cmc.

BI- STS

The most inexpensive as working position
Medium-smaller waxes
Prod. 4.000 pcs/day
One/two operators
Optional: double tank

Epigonos BI STATION STS

Injector with two independent non expanding working stations. Equipped of one melting tank and vacuum meters for checking the vacuum inside the mould, RFID microchip readers included. Micro syringe of 8 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 50x30x8 mm to 120x90x45* mm. Machine: 48 kg - 900x360xh530 cm / Wooden box: 75 kg - 100x47xh70 cm. (*) on special request from 50x30x23 mm to 120x120x60 mm, 16 cmc.

MONO – MAXI

The strongest of the serial
Bigger waxes
Only one operator

Epigonos MONO STATION MAXI

Not expanding Mono station injector. Equipped of one melting tank and one vacuum meter for checking the vacuum inside the mould, RFID microchip readers included. Syringe of 120 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 120x90x45* mm to 250x150x75 mm. Machine: 39 kg - 750x360xh530 cm / Wooden box: 70 kg - 100x47xh70 cm. (*) on special request 185x150x65 or 330x180x90 mm, 120 cmc.

BI-STS-MAXI

For smaller and bigger waxes
Only one operators on two working positions in order to avoid any “dead” time
Optional: double tank

Epigonos BI STATION STS MAXI

Independent, not expanding Bi injector station. Equipped of one melting tank and one vacuum meters for checking the vacuum inside the mould, RFID microchip readers included. Syringes from 8 and 120 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 50x30x8 mm to 250x150x75* mm. Machine: 52 kg - 105x360xh530 cm / Wooden box: 83 kg 115x47xh70 cm. (*) on special request from 18x150x60 to 330x180x90, 120 cmc.

2. TIDEO: CENTRAL UNIT + FREE CONFIGURATION

TIDEO STS-MAXI MAXI 250 STATION		TIDEO STS-STD STANDARD STATION
Modular position of modular injection equipped of one vacuum meter for checking the vacuum inside the mould, RFID microchip readers included. Syringe from 120 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 120x90x35 mm to 250x150x75 mm.		Modular position of modular injection equipped of one vacuum meter for checking the vacuum inside the mould, RFID microchip readers included. Micro syringe from 8 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 50x30x8 mm a 120x90x45* mm.

TIDEO STS-MAXI MAXI 185 STATION		TIDEO STS-MAXI MAXI 330 STATION
Modular position of modular injection equipped of one vacuum meter for checking the vacuum inside the mould, RFID microchip readers included. Syringe from 120 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 120x90x35 mm to 185x150x65 mm.		Modular position of modular injection equipped of one vacuum meter for checking the vacuum inside the mould, RFID microchip readers included. Syringe from 120 cmc with final setting up of the temperature and auto centring clamp for moulds with dimensions from 180x150x60 mm till 330x180x90 mm.

COOLING DOWN MOULDS

TC and TF VERSIONS

Static system without any gas and liquid substances
Quick and quiet
Low waste
Linear moulds to make the process easier
Less quantity of the moulds for the turn-over

TF-350

TC-600

TF-350 Cooler for moulds with a plate from 35 cm, without showing the temperature, 60 W. TC-350 Cooler for moulds with a plate from 35 cm, with checking and displaying the temperature, 60 W. TF-600 Cooler for moulds with a plate from 60 cm, without showing the temperature, 120 W. TC-600 Cooler for moulds with a plate from 60 cm, with checking and displaying the temperature, 120 W.

THE NEW GENERATION OF 3D OF WAX PIECES

Sensitive to all market requests, Riacetech has developed a wax injection process based on hydro soluble support. It will be possible to realize 3D filigreed and hollow objects using normal and standard wax and over going the removal boundary of the interior part of the mould.

Main advantages compared to the Prototype technique:

Inexpensive for bigger productions ( the cost of the Hydroresin if 5 times lower).
Final wax piece avoiding melting problems of the resins.
Number of pieces per day which can be made over any prototype.
Dissolving Hydroresina into still water ( no acids) and without any draining problems.
Fully non-toxicity.
Use of one of our standard injectors (no adding cost for special machinery).